B/X Series Cycloidal pin wheel reducer

The cycloidal pin wheel deceleration function can achieve a high deceleration ratio of 1:87, and the deceleration ratio is larger if the multi-stage transmission is used. The first-stage transmission deceleration ratio is 9~87, the two-stage transmission deceleration ratio is 121 ~ 5133, the multi-stage combination can reach tens of thousands, compact structure and small volume due to the use of planetary transmission principle, the input shaft and output shaft are on the same axis line, so that the model can be as small as possible. In operation, the number of teeth in contact at the same time is large, the coincidence degree is large, the operation is smooth, the overload capacity is strong, the vibration and noise are low, and the noise of various specifications is small. Reliable use, long life because the main parts of the bearing steel material, quenching treatment (HRC58 ~ 62) to obtain high strength, and part of the transmission contact using rolling friction, so long durable life. Because the main parts are made of bearing steel quenching treatment (HRC58-62), and then fine grinding, and cycloidal teeth and needle gear sleeve meshing transfer to the needle teeth to form rolling friction pairs, the friction coefficient is small, so that there is no relative sliding in the meshing area, minimal wear, so durable. Reasonable design, easy maintenance, easy to decompose and install, the minimum number of parts and simple lubrication, so that cycloidal pin gear reducer by the trust of users.